Learn how to apply our coating products like a PRO.
- Do not apply in direct sun or on hot surface
- Do not re-use 4" Suede applicators
- Do not re-use the towels you used to buff off with on paint
- Wear hand protection
- Wear respiratory protection such as painters mask
Shake CQuartz before use.
Wrap a 4″ microfiber suede
around the grey side of
applicator block. Slowly open
bottle and drag one or two lines of
product down the applicator.
Spread across paint in a criss
cross pattern approximately
50cm x 50cm at a time depending
Buff off as soon as it
flashes (within 1-2
minutes depending) using a
CarPro No Lint Ultra Towel 16″
x 16″. Be sure to remove all
excess residue and only then do you
move to the next section.
Switch out the 4″
Suedes every 2+/-
panels. Additional coats
may be applied with 60
minutes or wait until the
following day if you are beyond
60 minutes. CarPro recommends 2
coats. Max Layer – 3 coats.
Apply Reload after final coat
within 60 mins. Wait until next
day for Reload if you miss the 60
minute window or at least a
minimum of 12 hrs.