CarPro Boa Grey Microfiber Towel 500gx40cmx60cm
After the past two years of amazing reviews with the original CarPro BOA, we decided to release a Silver Boa for those looking for the ultimate in Ultra soft and plush wheel towels!
Made in Korea our Carpro BOA Microfiber towel features a circular knitted raised cloth. This creates the appearance, feel, and functionality of a 700 gsm microfiber towel without the lint issues of many towels in that range. It is in fact a 500gsm (gram square meter) extremely soft and paint safe towel.
(1) Silver-blue Boa
Size: 16″ x 24″
Made in: Korea
When caring for microfiber towels there are a few simple rules to live by. Microfiber towels should only be washed with other microfiber towels. If you wash with other types of fabrics like cotton, etc, the microfiber will retain lint from those fabrics. Wash with Micro-Restore which contains everything you want and nothing you do not. NEVER use fabric softeners or dryer sheets. When drying either hang dry or dry on a very low heat cycle and never leave them in the dryer long enough to heat up. A dry microfiber that is heated to a certain point melts and becomes a danger to paint. Rinsing your new towels in the washer is always a good habit but also be aware that some colors may bleed onto others if you mix colors during that first wash cycle. After use microfiber should be stored, washed, and kept separate according to their task. In other words you would never use a wheel towel and then mix it with your paint towel. Mixing wax and sealant towels with glass and drying towels are a good way to remove absorbency from or cause streaking with your drying towels. Interior or doorjamb towels will collect sand and particles you would never want in your paint buffing towels so keep those separate as well.
Points to Review:
Do not mix with towels used for other tasks
Do not mix varied colors especially during first few new washes.
Wash with Micro-Restore
NEVER use fabric softener sheets
Hang dry in dust free area or if dryer use only lowest heat setting