Features:

• SAFE ON ALL TYPES OF LEATHER
• PROTECTS FROM SWEAT, LIQUIDS AND LIGHT CONTAMINATION
• DOESN’T ALTER THE LOOK OF THE LEATHER

Step 1 Directions:

1. Shake well and apply CARPRO Cleanse with a foaming nozzle to the brush and/or small area of leather.
2. Gently agitate the cleaner in overlapping circles or direction.
3. Use a microfiber towel to wipe away the cleaner and residue.
4. Repeat if necessary and periodically rinse the leather brush with water.
5. Move to the next section and repeat steps 1 to 3..

Step 2 Directions:

1. After the leather has been cleaned and the surface is dry, shake and apply a pea-sized drop of CARPRO Lotion to the applicator and spread on a 16″ x 16″ section.
2. Gently massage CARPRO Lotion Leather conditioner into the leather until the surface is covered evenly.
3. Use a clean microfiber towel to wipe away excess conditioner.
4. Move to the next section and repeat steps 1 to 3.

Features:

• In lab tests, no fog formed after 60 minutes over boiling water or a hundred cycles of hot-and-cold.
• Safe and effective on all glass, lens types.
• Cleaner and anti-fog treatment in one step.
• One application lasts up to a month if untouched.

Directions:

1. Shake well before use.
2. Apply to dry surface: Spray on lightly and spread thin layer evenly with 4″ Suede wrapped around Foam Block Applicator (or with terry cloth microfiber).
3. Allow to cure before wiping off.
4. 23 to 70 Deg: Approximately 10 min.
5. 70 to 90 deg: Approximately 1-3 min.
6. Wipe off.
7. Do not touch, rub or clean the surface after applied.

Additional:

• Avoid application if possible in extremely humid conditions
• If the surface is extremely dirty, clean it with a CarPro glassfiber towel and Eraser
• Store in a cool, dry and ventilated place.
• Keep out of reach of children.
• Durability: 1 month if not touched or wiped off.
• TIP: In very cold weather, spray the surface with a fine mist (not too much) and use a thicker MF to wipe well if needed.