[NOV SALE] MJJC Foam Cannon S V3.0 for K Brand/Bxxch/Apacxx/ (1/4") Quick Connector Snow Wash
Price range: RM 42.50 through RM 397.80
CARPRO Sanding Disc 5" P1500 - Silicon Carbide Sanding Foam Pads For Wet / Dry Sanding
Price range: RM 28.00 through RM 120.00
MJJC High Pressure Trigger Gun Kit and 5 Spray Tips
Price range: RM 50.00 through RM 219.00
A compact pressure-washer trigger gun with a swivel connection and 1/4-inch quick-release outlet for changing between spray tips and a compatible foam cannon. Five colour-coded tips let you select a concentrated jet, a wider rinse pattern or low-pressure soap application. Choose the Gun Kit for the gun and five tips, or Adapter Only for a replacement hose connector. Match your hose fitting before purchase.
What it does
MJJC Short Trigger Gun V2.0 provides a compact hand-held connection between your pressure-washer hose and your chosen spray attachment. The swivel connection helps manage hose twisting, while the quick-release outlet makes it convenient to switch spray patterns or attach a compatible foam cannon.
Suitable for vehicle washing and rinsing with the correct nozzle, pressure and working distance. Select your package and hose connection carefully: the gun kit and adapter-only options contain different items.
Key benefits
- Compact handling: a short gun format for working around your vehicle.
- Quick attachment changes: 1/4-inch quick-release outlet for compatible tips and foam-cannon fittings.
- Selectable coverage: five separate tips for different spray angles and low-pressure soap use.
What is included
- Gun Kit: 1 MJJC Short Trigger Gun V2.0 with your selected hose-inlet connection, plus 5 separate spray tips: 0°, 15°, 25°, 40° and 65°.
- Adapter Only: 1 selected trigger-gun hose adapter. The gun and spray tips are not included.
- Pressure washer, hose and foam cannon are not included in these Gun Kit or Adapter Only options.
Essential specifications
- Maximum gun pressure rating: 200 bar. This is the equipment limit, not a recommended setting for washing paint.
- Outlet: 1/4-inch quick release for the spray attachment.
- Inlet: the selected connection that attaches to your pressure-washer hose.
- Nozzle type: five interchangeable tips, each with a fixed spray pattern.
Choose the correct hose fitting
Available inlet options: K-Series, 3/8-inch quick connection, 8 mm, 9 mm, M22 x 1.5 mm with 14 mm inner bore, or M22 x 1.5 mm with 15 mm inner bore.
Check your exact washer model and hose-end shape before ordering. The 8 mm and 9 mm choices refer to the hose-end connector, not the outside diameter of the hose. The M22-14 mm and M22-15 mm versions have different inner bores. A 3/8-inch hose inlet is separate from the gun’s 1/4-inch attachment outlet.
If unsure, send us the washer model and a clear photo of the hose end. A matching brand name alone does not confirm compatibility.
Five spray tips explained
The angle describes the spread of the spray. At the same working distance, a wider angle covers a broader area. It does not guarantee a safe pressure for every surface.
Red 0° | Pinpoint jet
Concentrates the stream into a very small area with no fan pattern. Intended for specialist spot work on suitable robust surfaces. Do not use this tip for vehicle washing.
Yellow 15° | Narrow fan
A focused fan for concentrated cleaning over a small area. Use only where the surface and pressure-washer instructions allow it; avoid vehicle paint, trim and seals.
Green 25° | Medium fan
A balance of coverage and a focused fan. MJJC recommends this tip for car washing with suitable pressure and spray angle. Begin at a distance and test first.
White 40° | Wide fan
Spreads the water over a broader area for rinsing coverage. Maintain a suitable working distance; a wider fan can still damage a surface if used too close.
Black 65° | Low-pressure soap
A broad, low-pressure pattern for soap application where your pressure washer supports it. Check the washer’s detergent-system instructions. For snow-foam application, use a compatible foam cannon.
Directions for use
- Switch off the washer and release trapped pressure as directed in its manual before fitting the gun or changing attachments.
- Connect the correct hose fitting. Fit the chosen tip into the 1/4-inch outlet and check that the quick-release connection is fully secured.
- Start the washer according to its instructions. Point the gun away from people and the vehicle and test the spray towards a safe ground area.
- For vehicle washing, select a suitable fan tip. Start from a distance, then test a small, inconspicuous area at an appropriate pressure and angle. Keep the spray moving.
- Stop and depressurise before changing tips. After using detergent, flush and shut down the system as directed by the pressure-washer manufacturer.
Precautions
- Never direct the jet at people, animals or electrical equipment. Wear suitable eye protection and keep children away.
- Do not exceed the rating of the lowest-rated gun, hose, connector or attachment in the system.
- Do not use the 0° jet on a vehicle. Avoid concentrated spray on paint, trim, rubber seals, damaged coatings and delicate components.
- Check connections for secure engagement, damage and leaks before use. Never disconnect a pressurised fitting.
- Follow the washer and surface-care instructions. No spray tip makes an unsuitable pressure or distance safe.
